Bolts, nuts and washers sorting jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple jig to make sorting bolts, nuts and washers easier and faster. Bolts and nuts from M2,5 to M6 can be sorted.…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 935
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A simple jig to make sorting bolts, nuts and washers easier and faster. Bolts and nuts from M2,5 to M6 can be sorted. By washers the range is just from M3 to M6. The washer testing part requires one bolt from each size to be screwed in from the bottom, thus you have to tap the holes in the printed part and prepare the bolts (length doesn't matter. 10 - 15 mm works well). The holes for testing screw diameter have to be drilled to perfect sizes (2,5mm; 3mm; 4mm; 5mm; 6mm).
The screws for washer testing section have to be threaded all to way to the head.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0,2 mm
Infill:
20 %
Filament:
PM PLA
Notes:
Print with 3 perimeters, because you will have to cut threads in some holes.
Required:M3, M4, M5, M6 taps
2,5; 3; 3,2; 4; 4,2; 5; 6 mm drill bits
(2,5; 3,2; 4,2; 5 mm for the tapped holes. 2,5; 3; 4; 5; 6 mm for screw testing holes.)
M3,4,5,6/10-15 mm screws (One piece of each diameter.)
Category: DIY