1 / 3
a959 a979a WLToys rear hub, works with ball bearings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've used a few rear hubs and found that they didn't work, either by being too weak, having the wrong sized holes, or…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
I've used a few rear hubs and found that they didn't work, either by being too weak, having the wrong sized holes, or being incompatible with ball bearings.
I whipped these up and they work great.
Note they may not fit the a9x9b series.
Print Settings
Resolution:
.2
Notes:
I print at 0.2 with no supports.
Note you will have to push out the single layer across the bushing hole. I would recommend cleaning it with a small blade.Category: R/C Vehicles