1 / 3
a959 a979a WLToys rear hub, works with ball bearings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've used a few rear hubs and found that they didn't work, either by being too weak, having the wrong sized holes, or…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I've used a few rear hubs and found that they didn't work, either by being too weak, having the wrong sized holes, or being incompatible with ball bearings.
I whipped these up and they work great.
Note they may not fit the a9x9b series.
Print Settings
Resolution:
.2
Notes:
I print at 0.2 with no supports.
Note you will have to push out the single layer across the bushing hole. I would recommend cleaning it with a small blade.Category: R/C Vehicles