Wide Razor Planer / Scrapper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was always looking for a solution for a balsa planer tool, that will be wide enough. I didn't find a suitable tool…
- Ocena
- 4 / 5
- Polubienia
- 18
- Pobrania
- 114
- Wydruki
- 2
- Wyświetlenia
- 1007
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was always looking for a solution for a balsa planer tool, that will be wide enough. I didn't find a suitable tool so I planned a suitable tool that uses with standard blades.
This tool is not intend to replace a professional tool.
I used a standard 18mm blade.
Standard cutting blade 2 sides beveled, it is preferable for the product to use a blade with only one side beveled. Attaches a link to an example product :
https://www.amazon.com/62901Q-Stripper-Blades-Carded-Count/dp/B074F2TBNY
To hold the blade in place, and adjust it you need :
4x screws + nuts, I used M4x25mm
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
20%
Filament: Tesla Filament PLA White
Notes:
Category: DIY