Wide Razor Planer / Scrapper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was always looking for a solution for a balsa planer tool, that will be wide enough. I didn't find a suitable tool…
- Rating
- 4 / 5
- Likes
- 18
- Downloads
- 114
- Makes
- 2
- Views
- 1,007
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was always looking for a solution for a balsa planer tool, that will be wide enough. I didn't find a suitable tool so I planned a suitable tool that uses with standard blades.
This tool is not intend to replace a professional tool.
I used a standard 18mm blade.
Standard cutting blade 2 sides beveled, it is preferable for the product to use a blade with only one side beveled. Attaches a link to an example product :
https://www.amazon.com/62901Q-Stripper-Blades-Carded-Count/dp/B074F2TBNY
To hold the blade in place, and adjust it you need :
4x screws + nuts, I used M4x25mm
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
20%
Filament: Tesla Filament PLA White
Notes:
Category: DIY