Stihl FS91 and FS31 Trimmer Wallmount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the trimmer upright on the wall for convenient storage
- Ocena
- 5 / 5
- Polubienia
- 190
- Pobrania
- 1727
- Wydruki
- 12
- Wyświetlenia
- 7137
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple but very sturdy wall mount for a FS91 and FS31 trimmer. It may fit other models as well with the same injection molded part around the upper driveshaft. I modeled this around my specific machine and you may need to scale it up to make yours fit properly. I highly suggest printing a test part with 10% infill to check the fit before you print with the settings below. Mount it with 3" to 3.5" #8 construction screws. Make sure you get the screws in a stud.
I have made a change to the part in the pictures. The hole for accessing the head of the upper screw was too small for a bit holder to pass through. I added more clearance so its easier to get the upper screw driven in.
Standard prusaslicer settings for a mini and prusament PETG with the following changes:
20% infill and 4 perimeters.
I think this would be a great part to print with a larger nozzle to cut down on the time, I just didn't feel like changing it out.