1:10 Crawler Wheel - KR (Kenny Rogers)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print these in the shiniest silver filament you can find. I use YOUSU off of Amazon…
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 1432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Print these in the shiniest silver filament you can find. I use YOUSU off of Amazon (https://www.amazon.com/gp/product/B0854KYS6F)
It will only work with hubs that support the 12x6 bolt pattern, though it may be possible to design a retaining cap without destroying the look of the wheels.
I like to tap the holes for the m2 screws.
Print with supports, mating side down.
Insert the two halves into your tire.
Attach the 2 halves through the back using M2x6 screws.
Version 1
Files: kr-outside, kr-inside.stl
Version 2
I created a second version with slightly less offset and a more tapered barrel and shaped rim.
Files: kr-ii-outside, kr-ii-inside.stl
Note: For best results, use with my tire insert. https://www.thingiverse.com/thing:4762362
Print Settings
Supports:
Yes
Infill:
15%
Filament: Yousu PLA pearlescent silver
Category: R/C Vehicles