1 / 3
Adafruit Heat Set Insert Press Tri-Bearing Plate (+2mm) — zdjęcie 1
1 / 3

Adafruit Heat Set Insert Press Tri-Bearing Plate (+2mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a wider version of the Adafruit Heat Set Insert Press Tri-Bearing Plate, designed to support available bearings.

Ocena
5 / 5
Polubienia
17
Pobrania
88
Wydruki
1
Wyświetlenia
670
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a modified version of the “roller plate” 3D-printed part for the Adafruit Heat Set Insert Rig (https://learn.adafruit.com/heat-set-rig). The BOM for the rig calls for “3x 625Z ball bearings with wheels” from Amazon (https://www.amazon.com/dp/B01FJHZ42M/) which are no longer available. The next closest thing I could find were these 625ZZ bearings with wheels (https://www.amazon.com/gp/product/B07GF9VGHD) which are apparently a little bit bigger, and would not allow the assembled roller plate to fit onto the 2020 extrusion without bending the plate and causing the plate to be unable to move freely along the extrusion.

This version of the plate is 2mm wider to accommodate for the above-linked (and available!) bearings! 

 

Printed on a Prusa Mini+ with Atomic CF-PETG Pro, 25% infill, .2 layer height.

Tagi