1 / 5
Bosch fridge/freezer replacement door handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement door handle for the Bosch Intelligent Freezer 32 and Intelligent Refridgerator 39. This part is functional…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 607
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Replacement door handle for the Bosch Intelligent Freezer 32 and Intelligent Refridgerator 39.
This part is functional and doesn't aesthetically match the original Bosch handle.
Files
- Male.stl + Female.stl files to glue together for smaller printer beds
- Full.stl for printers that can print the whole part in one go.
- Bosch v10.step contains the CAD drawing
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
30
Filament:
Hatchbox PLA
Notes:
Supports
Supports are needed**but make sure not to create any for the holes** in this part, so supports from the bed up only works well.Post-printing steps
- Epoxy resin to glue the two parts together
- I didn't have filament to match the fridge colour and applied wood filler and spray paint to match the original colour as close as possible.
- Light sanding in certain parts
Post-Printing
Parts - Not glued
Fitted
Category: Kitchen & Dining