mini 3 Button Keyboard with RotaryEncoder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My version of a min 3 button hotkey keyboard or streamdeck , yes it cloud be smaller but this size fits nice on my…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
My version of a min 3 button hotkey keyboard or streamdeck , yes it cloud be smaller but this size fits nice on my desk.
It uses Acrade buttons from Pimoroni and an Arduino ProMicro (32u4)
Update:
- I added a RotayEncoder, a very simple one like you can buy for 2€ or less per item on the internet. It does not have a PCB so I had just to drill a hole in one corner to mount it in the printed case. I still miss a nice knob design for it.
- Updated the Arduino Code to 4 button and encoder and AHK file too, it uses the now the some Media Control Keys.
- Added the knob, I cut the encoder shaft so it's nicer length.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament:
any any
Notes:
Printing
You might have to flip the parts by 180 degree, ctrl+L in Simplified 3D
so the flat faces are on the bed no need for support.
Assembly:
Use hot glue to glue the Micro to the adapter plate and the bottom plate.
- close the case (top and bottom, it's easy to open)
- put the Micro in the adapter, put a little hot glue through the button hole next to the USB hole, press the adapter with the micro in the glue make sure the USB parts line up.
- open it again and add more glue to fix it is place
- install button and solder them.
- hot glue the Micro in the adapter and close the case.
Category: Computer