1 / 3
Mini-AfterSherpa Voron 0.1 Dual 4010 Fans — zdjęcie 1
1 / 3

Mini-AfterSherpa Voron 0.1 Dual 4010 Fans

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is to add 2 4010 fans to the Mini-AfterSherpa

Ocena
0 / 5
Polubienia
41
Pobrania
244
Wydruki
0
Wyświetlenia
3390
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a mod of the Mini-AfterSherpa to mount 2 4010 fans. To get it to fit onto the x carriage some plastic needs to be removed around the side and bottom of their insets on the x carriage. The fan ducts some filing and superglued in place. Most 4010 fans have gaps behind the mounting holes and they need to be filler or when you screw them on the mounts will break. I filled the holes with hot glue and then sliced them smooth with a knife and then drilled a new hole.

The increased size of the 4010 fans means there is much less space for running cables between the 1515 extrusion and the fans, because of this the belts can be pressed up against the extrusion making it hard to move the tool head (and this is probably really bad for the belts). Therefore you need to be careful when running cables and run some up the left and some up the right.

It can be run in Bowden or using a sherpa mini or sailfin extruder for more info on extruders check out the Mini-AfterSherpa GitHub here https://github.com/KurioHonoo/Mini-AfterSherpa.

It mounts using the 2 M3x35 Bolts that are standard 

Materials:

  • 4 M2X8 4010 part fan
  • 4 M2 nuts 4010 part fan
  • 4 M3x12 3006 hot-end fan
  • 4 M3 Nuts hot-end fan
  • 2 M3 threaded inserts extruder mount

Tagi