1 / 3
Tesla Mobile Connector charger (gen 2) wall mount and plug holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the mobile connector, has a slot to hook your plug, as well as a horn for the cable.
- Ocena
- 5 / 5
- Polubienia
- 111
- Pobrania
- 757
- Wydruki
- 7
- Wyświetlenia
- 5836
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 7) (Komentarze: 12)Remiksy (0)Kolekcje (159)Powiązane
Features:
Holds brick, cable, and plug all in one assembly. Easy to remove brick for mobility. Snug up-side down fit.
Print:
Flat, 25% infill, >1mm walls, no supports. PETG probably best.
Mate:
To wall, three regular 5mm drywall screw holes are provided. Since the force can be pretty high if you do a lot of pulling, you should consider drywall anchors of some sort.
V1: Slot for 7mm x 3 in dowel to improve stability.
V2: Slot for 3" drywall/interior screw for stability.