Baby Magnetic Cabinet Lock - Key
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple housing that holds magnets for your babyproofing convenience.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 1821
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
For some reason when you buy baby magnetic cabinet locks, you get 20 locks, but only 2 keys!
I got sick of never having a key when I needed one, so I whipped up this model.
It's a simple housing that holds (x4) 15mm x 2mm magnets.
The cap has a small slit for a flat head screw driver. You can tighten it with that. Make sure you orient the magnets correctly (They only work in one polarity with your locks) before you tighten the cap.
Print with low layer height to maintain the inner threads.
My print recommendations:
- .12 layer height (maybe lower if this isn't working for you.)
- 20% infill
- NO supports
Here are the magnets I used for my keys:
https://www.amazon.com/dp/B09TZWP3KJ?psc=1&ref=ppx_yo2ov_dt_b_product_details
Depending on how many you actually need, maybe you will want to buy a smaller quantity. Again, this model only requires FOUR of these 2mm thick magnets.