1 / 3
Bridging tests
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Models designed specifically for testing your bridging settings.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 119
- Wydruki
- 2
- Wyświetlenia
- 515
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
Short Introduction VIDEO for the unofficial Drag Race.
- Are you needed to work on your bridging settings?
- Are you sick of using the same small feature of a model to print?
This is a test you need!
Three tests in all for .4 .6 and .8 nozzles.
Each model is adjusted in Z only for each bigger nozzle.
Distances to bridge vary. From 10mm up to 50mm.
Designed to not waste much material, but still provide a useful test. Able to be printed over and over fairly quickly.
Not much else to say about these.
They are just tests.
