1 / 5
Ego 56-volt ST1500 trimmer bump head (AH1500/AH1501) — zdjęcie 1
1 / 5

Ego 56-volt ST1500 trimmer bump head (AH1500/AH1501)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ego 56-volt ST1500 trimmer bump head (Part No. for replacement head is AH1500). For the STA1500 Multi-Tool trimmer…

Ocena
5 / 5
Polubienia
19
Pobrania
90
Wydruki
2
Wyświetlenia
977
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Ego 56-volt ST1500 trimmer bump head (Part No. for replacement head is AH1500). For the STA1500 Multi-Tool trimmer attachment, the bump head is: AH1501.

Why? Made this because I wore out two of them, and at $30 each, they are cost prohibitive. Other people have complained about the same issue (soft plastic, and thin design.

https://egopowerplus.com/15-inch-rapid-reload-replacement-string-trimmer-head/

Note: the AH1501 looks very similar, but the tab on the inside is off-set by 60 degrees, and the rotation is the opposite direction. Bottom line, will not work. Once I get this design finalized I will make a bump head for the AH1501 too.

https://egopowerplus.com/multi-head-system-rapid-reload-trimmer-head/ https://egopowerplus.com/multi-head-string-trimmer/

Update 3 (10/13/19): AH1500 and AH1501 both updated to v105, to correct the inside hole being too tight (increased diameter 0.010"). Note: v104 will work, but you have to insert the Ego nut, and spin it with a drill to create sufficient clearance.

Update 2 (10/10): AH1501 v104 uploaded. Known issues: The center hole may need to be reamed out; if so, I'll create an update STL.

Update 1 (10/09): Completed the minor change to the AH1501, v104 is the latest. Testing the AH1501 print, and will upload the STL tomorrow.

Print Settings

Printer:

Lulzbot TAZ 5/6

Rafts:

No

Supports:

Yes

Resolution:

0.28mm

Infill:

100%

Filament:

Ninja Tek ABS

Any

Category: Outdoor & Garden

Tagi