Ego 56-volt ST1500 trimmer bump head (AH1500/AH1501)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ego 56-volt ST1500 trimmer bump head (Part No. for replacement head is AH1500). For the STA1500 Multi-Tool trimmer…
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 90
- Makes
- 2
- Views
- 978
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Ego 56-volt ST1500 trimmer bump head (Part No. for replacement head is AH1500). For the STA1500 Multi-Tool trimmer attachment, the bump head is: AH1501.
Why? Made this because I wore out two of them, and at $30 each, they are cost prohibitive. Other people have complained about the same issue (soft plastic, and thin design.
https://egopowerplus.com/15-inch-rapid-reload-replacement-string-trimmer-head/
Note: the AH1501 looks very similar, but the tab on the inside is off-set by 60 degrees, and the rotation is the opposite direction. Bottom line, will not work. Once I get this design finalized I will make a bump head for the AH1501 too.
https://egopowerplus.com/multi-head-system-rapid-reload-trimmer-head/ https://egopowerplus.com/multi-head-string-trimmer/
Update 3 (10/13/19): AH1500 and AH1501 both updated to v105, to correct the inside hole being too tight (increased diameter 0.010"). Note: v104 will work, but you have to insert the Ego nut, and spin it with a drill to create sufficient clearance.
Update 2 (10/10): AH1501 v104 uploaded. Known issues: The center hole may need to be reamed out; if so, I'll create an update STL.
Update 1 (10/09): Completed the minor change to the AH1501, v104 is the latest. Testing the AH1501 print, and will upload the STL tomorrow.
Print Settings
Printer:
Lulzbot TAZ 5/6
Rafts:
No
Supports:
Yes
Resolution:
0.28mm
Infill:
100%
Filament:
Ninja Tek ABS
Any
Category: Outdoor & Garden