1 / 9
Wall mounted hanger for Chemical Guys Foam Cannon (approx. 84mm dia) — zdjęcie 1
1 / 9

Wall mounted hanger for Chemical Guys Foam Cannon (approx. 84mm dia)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed a storage solution for my Foam Cannon. This is what I came up with.

Ocena
5 / 5
Polubienia
20
Pobrania
119
Wydruki
1
Wyświetlenia
1056
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I needed a storage solution for my Chemical Guys Foam Cannon. This is my first real attempt at a 3D design. I made a one piece and a two piece design. The two piece design does not require support, and uses less material. I also found that most spay bottles will fit the holder as well. I printed using Filacube black PLA. This was printed using CHEP's super fast profile and 20% infill on my Ender 3 Pro. I printed the one piece upside down with support, this did use quite a bit of material. I have not attempted to print it on it's back, as I'm not sure how that would affect the “clamp” part of the hanger.

Tagi