wrench, rain barrel, tank fitting, banjo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
While upgrading the tank fittings (aka bulk head fittings) on my rain barrels, I found the larger one required a giant…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
While upgrading the tank fittings (aka bulk head fittings) on my rain barrels, I found the larger one required a giant wrench. While I could use an extra large pipe wrench, those tend to mar and/or deform the plastic (polyethylene) fittings. The small wrench is for the female part of the fitting, and the large wrench is for the nut. The small wrench is 2.97 inches (75.4mm) across the flats, and the large is 3.97 inches (100.8mm). Both wrenches are 0.5 inches (12.7mm) thick.
This will work with the Banjo brand TF-150 and TF-200 (might fit the TF-125, but don't have one to verify).
https://smile.amazon.com/dp/B0079JU3J8 https://smile.amazon.com/dp/B0079JU6J0
Category: Hand Tools