wrench, rain barrel, tank fitting, banjo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
While upgrading the tank fittings (aka bulk head fittings) on my rain barrels, I found the larger one required a giant…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 1
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
While upgrading the tank fittings (aka bulk head fittings) on my rain barrels, I found the larger one required a giant wrench. While I could use an extra large pipe wrench, those tend to mar and/or deform the plastic (polyethylene) fittings. The small wrench is for the female part of the fitting, and the large wrench is for the nut. The small wrench is 2.97 inches (75.4mm) across the flats, and the large is 3.97 inches (100.8mm). Both wrenches are 0.5 inches (12.7mm) thick.
This will work with the Banjo brand TF-150 and TF-200 (might fit the TF-125, but don't have one to verify).
https://smile.amazon.com/dp/B0079JU3J8 https://smile.amazon.com/dp/B0079JU6J0
Category: Hand Tools