Arai Helmet, Corsair-X, rear logo cover, Armor of God Shield / Sword / Cross
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Arai helmet, Corsair-X. This is a small cover for the rear logo. I uploaded the STEP file. Armor of God version.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 3
- Wyświetlenia
- 1000
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Arai helmet, Corsair-X. This is a small cover for the rear logo. I uploaded the STEP file, should anyone want to customize it with a logo to match their brand of motorcycle, or something else.
Background: I really didn't like the #25 Maverick advertising on the back of the helmet, so rather than just cover it with a velcro morale patch, or sticker, I decided to make something a little more permanent.
Installation: I used adhesive back velcro for the installation. The loop side is on the helmet, and the hook side is on the back of the cover.
Update (6/15/19): Added two files, the one with flat-base in the title would be used if you want to put a sticker on the cover. The 1031.STL file is just a minor revision to correct the up-down curvature to match the helmet slightly better (the old one will work fine too).
Update (6/15/19, #2): Added an Armor of God themed version. v1021 has rivets added to the front edge of the shield.
Update (10/13/25, #3): Revised the AoG model, thickened the layers to make it nicer to print in multi-color.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini 2
Rafts:
No
Supports:
Yes
Resolution:
0.25 mm
Infill:
50%
Filament: Ninja Tek ABS white
Notes:
Print orientation is sitting on the wide edge, with a BRIM. I tried printing it flat, but the results were not as good, probably due to the 3/32" thickness of the part.
Category: Sport & Outdoors