Trinket plate/bowl and decorative plate stand.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small plates and accompanying plate stand for displaying/storing small items such as jewellery, hair ties, keys, etc.
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 847
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Plate - 2hrs 24min
Plate Stand - 41hrs
My first major design and print with CAD software.
The plate and plate stand comes out very nicely, however the plate stand does require a copious amount of support, which did take 2hrs to remove. Regardless, I was pretty happy with the final result. Feel free to remix this print to make it a more time feasible print.
Print Settings
Printed using Cura on an Ender 3 v2.
Plate
Quality: 0.2mm
Walls: 1.2mm (3 walls)
Infill: 10% using Gyroid
Material: PLA
Speed: 80mm/s
Cooling: 100%
Support: none (will result in layer shift, use standard supports if you don't want this)
Build Plate Adhesion: none
Other notes: Use monotonic top/bottom order (only for the plate)
Plate Stand
Quality: 0.2mm
Walls: 1.2mm (3 walls)
Infill: 10% using Gyroid
Material: PLA
Speed: 80mm/s
Cooling: 100%
Support: Tree
- Tree Support Branch Angle: 40
- Tree Support Branch Distance: 1.0
- Tree Support Branch Diameter: 2.0
- Tree Support Diameter Angle: 5.0
- Tree Support Collision Resolution: 0.2
- Support Placement: Touching Build plate
- Support Overhang Angle: 45
- Support Density: 2.0% (Without support density my supports would fall over)
Build Plate Adhesion: Raft
Other notes: RIP fingers from removing supports if you are daring enough to print this.
I used pliers, scissors and my hands to remove the supports.