1 / 8
Trinket plate/bowl and decorative plate stand. — image 1
1 / 8

Trinket plate/bowl and decorative plate stand.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Small plates and accompanying plate stand for displaying/storing small items such as jewellery, hair ties, keys, etc.

Rating
0 / 5
Likes
52
Downloads
94
Makes
0
Views
847
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial — Share Alike

Plate - 2hrs 24min

Plate Stand - 41hrs

My first major design and print with CAD software.

The plate and plate stand comes out very nicely, however the plate stand does require a copious amount of support, which did take 2hrs to remove. Regardless, I was pretty happy with the final result. Feel free to remix this print to make it a more time feasible print.

 

Print Settings 

Printed using Cura on an Ender 3 v2.

Plate

Quality: 0.2mm

Walls: 1.2mm (3 walls)

Infill: 10% using Gyroid

Material: PLA

Speed: 80mm/s

Cooling: 100%

Support: none (will result in layer shift, use standard supports if you don't want this)

Build Plate Adhesion: none

Other notes: Use monotonic top/bottom order (only for the plate)

Plate Stand

Quality: 0.2mm

Walls: 1.2mm (3 walls)

Infill: 10% using Gyroid

Material: PLA

Speed: 80mm/s

Cooling: 100%

Support: Tree 

  • Tree Support Branch Angle: 40
  • Tree Support Branch Distance: 1.0
  • Tree Support Branch Diameter: 2.0 
  • Tree Support Diameter Angle: 5.0
  • Tree Support Collision Resolution: 0.2
  • Support Placement: Touching Build plate
  • Support Overhang Angle: 45
  • Support Density: 2.0% (Without support density my supports would fall over)

Build Plate Adhesion: Raft

Other notes: RIP fingers from removing supports if you are daring enough to print this.

I used pliers, scissors and my hands to remove the supports.

 

 

 

Tags