Prop Syringe refilling and injecting effect
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a prop that makes it appear as if one is injecting themselves when actually the liquid is disappearing
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
Can be reused and the effect also works when ‘drawing up’ fluid. It uses 60ml syringe as standard from BD Plastipack. Be careful when inverting with plunger down as the liquid can spill out from the top.
For best effect print in SLA (0.2mm layers is fine) Fits on a photon mono printer. It will need supports
Can be printed in FDM if you can bridge well. No supports otherwise the internal cavity will be filled
If you wish to use commercially please contact me. Fully assembled version is available to purchase, just contact me