ESP32CAM Fisheye IR Camera Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Fisheye Camera Case from a Raspberry Pi Fisheye Module to Support night vision to a ESP32CAM as I had this…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 595
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Fisheye Camera Case from a Raspberry Pi Fisheye Module to Support night vision to a ESP32CAM as I had this camera lying around.
The ESP32 Fisheye Cameras / Lenses contains a IR-Filter, so they won't work in night vision.
You will have to de-cap the plastic lens mount of the camera, mine was just glued on. I'll recommend tlo use Hot-Air. I just killed 2 cameras by using a box cutter.
As the IR Blaster gets quite hot I did not make a back cover intentionally!
Do not connect the IR Blaster to the 3.3V rail of the ESP32! The AMS1117 chip on the ESP32 board will get toasty-hot!
Links: ESP32 Fisheye Cameras / Lenses Raspberry Pi Fisheye Module Raspberry Pi IR Blaster Micro USB Breakout Board Glass Tube Fuse Holder 200mA Glass Fuse Fast Blow OPTIONAL 5V to 3.3V buck converter
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
25%
Filament: Polymaker Polyflex TPU Black
Notes:
I used Polyflex TPU, with tree supports with the camera mount printed on its side.
Print Speed of 20mm/s.
Category: Camera