1 / 5
UM2 Fan Duct with leveling sensor and front 30mm fan duct
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attention: Print upside-down! Use support material but make shure there is no inside the fan ducts! The 30mm front fan…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Attention: Print upside-down! Use support material but make shure there is no inside the fan ducts!
The 30mm front fan is based on one of my other designs: https://www.thingiverse.com/thing:2839264
The bed-level sensor things are described here: https://www.thingiverse.com/thing:3090618
Category: 3D Printer Accessories