Liczymy pasujące modele…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
This is a mount for a Behringer U-Phoria UM2 audio interface. didn't like how it took up desk space and also how it would get dusty after a while so designed a mount so that it can sit under the desk. uses 4 tiny screws (guitar screws…
You can order the collets I used here .
[I've removed the models for the first version as they cooled the nozzle more than the part! ] These ducts position the air flow around part under the nozzle better. Because the cooling is more effective you may need need to reduce max…
I wanted a nozzle box for my UM2 style nozzles, which fit the Biqu B1, but the ones available (at least that I found) were quite large. I remixed gportelli's hinged print in place parametric box to hold 10 nozzles. The box prints in…
Please check the → GitHub page ← for more information about this design before printing. If you appreciate my designs and would like to support my work, you can do so by buying me a coffee. Your support means a lot!…
Just a simple under desk mount for the behringer um2! My main goal with this mount was just a simple way to mount my audio interface under the desk without blocking any of the ports and dials. Just 4 screws needed to mount it. (Maybe can…
This is a sensor cover for the Bondtech extruder upgrade for the Prusa MK3S / MK3S+ for reverse bowden using a collet clip . It's a remix of the original sensor cover by Bondtech. Supported PTFE Collet Clips Name Printed Part Sourcing UM2…
connect multi AMS smoother and less issue than the bambu 4 way hub, Easy to Print, It prints without falling of plate and DOES NOT mover while printing to give you a high quality print that fit and works.. UPDATE: after printing make sure…
This is a remix based off of GameFan 's model found here but edited slightly to allow the UM2 to be mounted. The UM2 has the knobs on its top, so if you're mounting under a desk the unit will have to be upside down. I found that the rails…
My attempt at installing a PTFE coupler to the sherpa micro. I really like the micro, but when unloading filament with the help of the extruder, it tends to push out the PTFE tube. It uses a UM2 quick connector that I have salvaged from…
These knobs have better visibility of their position, have a better grip and can be customized with any color! They slide on snugly to the encoders. For those of you wondering how I made them multicolored, I used the Color Change option…
This is a simple BEHRINGER UM2 stand which is one of simple audio interface. I made this PVB filament for the gross of this picture, but it can be made by PLA, and so on. ベリンガー UM2…
Should be printed în PETG (PLA is too britle). You can buy cheap UM2 collets pack (10 pcs - $2) here https://s.click.aliexpress.com/e/_oBiPN3h Also checkout the model with PC4-M6 Pneumatic Connector…
This is a sliding block for an Ultimaker 2 (and possibly other printer models). It is printed in one piece. The length is no longer than the bearing, and has a 6mm offset. The 6mm offset lets you have a larger print volume when using a…
This slide block was design to be use with 8mm rods. Material that you will need: 2x M2.5 screw + nuts ( 12mm ) 2x M3 screw + nuts ( 10mm ) 1x M3 screw + nut ( 12mm ) - This one i did use to lock the linear rod. Original bearing ( ID8mm…
This is a basic PTFE coupler that attaches to a 2020 extrusion. Uses a UM2 collet, 2 x M3 T-nuts and 2 x SHCS or BHCS M3 screws.
Edit: Update 16.01.204, my UltiMaker2 is still in use. Added Creality Touch mount in favor of the optical sensor (better accuracy) Changed all Brass inserts to 4mm to fit a M3x4mm curled nuts with an OD of 4mm (works fine for me) This is…
A simple snap-fit case for cool usb tester from JOY-IT . Buttons are integrated with the case - no small parts, no complicated assembly. Just print the parts, remove the tiny supports (already included in model, dont use supports in…
Since the axes on both the Ultimaker 2 and the Ultimaker Original (Plus) are 18mm apart and use the same size rods, they can use the same printhead, but since the axes are the other way around the printhead gets turned 90 degrees, this…
made enclosure for UM2... files include cutfiles for acrylic sheets also
This is the latest revision of my mount to be able to upgrade a UMO+ with the UM2 Drivetrain Extrusion upgrade kit to be able to get the same feeder and printhead as the latest and greatest UM2+ Guide on how to do this process can be…
Holder for an Dial Gauge to easyer calibrathe the printbed. It is mounted ontop of the UM2 head with the original screws. As for the Dial Gauge the Neoteck NTK021 was used. Category: 3D Printer Accessories
This is a mount/adapter to allow the use of the fantastic IRobertI Ultimaker 2/2+ low friction spool holder on the Trinus 3D printer. You need to build the spool holder exactly as IRobertI has it setup, apart from the mount section.…
Remix of the great "BowdenTube Straightener" by TheSeend adapted for an Ultimaker 2+ and Ultimaker Extended 2+. What are different in this remix : the bowden straightener region is now circular , in order to straighten the tube during…
Attention: Print upside-down! Use support material but make shure there is nothing inside the fan ducts! YOU WILL LOOSE BUILD-SPACE with this design! Around 10mm on each side of the X-Axis. You will need to print the spacer and put it…
Attention: Print upside-down! Use support material but make shure there is no inside the fan ducts! The 30mm front fan is based on one of my other designs: https://www.thingiverse.com/thing:2839264 The bed-level sensor things are…
Made holes larger and added counter bore for M3 nut so you can securely tighten fan. Category: 3D Printer Parts
after a while the screw hole in the original mount could not hold a screw so i made a version where you can put in a m3 nut. to original maker you can add thise files to your thing also if you like. Category: 3D Printer Parts
UM2 Clone brackets remixed for better fit Bosch Rexroth 2020 extrusion (6mm T-Slots and M6 screws for top and bottom brackets) with additional bracket for round rocker switch for power or LED on/off. I've also included Z-axis motor spacer…
Since I no longer had a standard PTFE tube connector to attach to the filament guide for my Creality Space PI, I decided to use UM2 connectors. This adapter uses the same filament guide base but is compatible with UM2 connectors. The…
Reduces amount of printing needed if you have 2020 aluminium extrusions handy Category: Camera
Remix of the great "BowdenTube Straightener" by TheSeend adapted for an Ultimaker 2+ and Ultimaker Extended 2+. What are different in this remix : the bowden straightener region is now circular , in order to straighten the tube during…
UM2 Clone brackets remixed for better fit Bosch Rexroth 2020 extrusion (6mm T-Slots and M6 screws for top and bottom brackets) with additional bracket for round rocker switch for power or LED on/off. I've also included Z-axis motor spacer…
Created a Remix to use the UM2 Connectors i had laying around. Based on the Model: https://www.printables.com/model/591576-sherpa-mini-with-zero-ecas-and-filament-sensor-mod
quick UM2 replacement of cracked sheetmetal fanmount. this turned out to work very good, and reduced noice also… step file also, so it can be altered if you want :-) (make it better and give me a hint :-)) only drill out 1,5mm holes for…
Print items from PETG and TPU. Connect the elements with M3 8mm screws.
Remake for use with 3010 blower fans and only 2 parts (hats of for THIEME for the idea and models)
This lets you mount a normal UM2+ feeder on the right side of the printer as your second extruder. Unlike other mounts, there is a cut out along the side of the mounting plate on this one to accommodate aligning the unmodified UM2+ feeder…
Ich habe diese Halterung für die rechte und linke Seite des Ultimakers gemacht. Da noch Platz hinten für den Dualextruder gebraucht wird.. Zusätzlich noch kleine Verbesserungen Hoffe hab nichts übersehen :-) ooooooooooooooooooooooooo I…
I've finaly made it! This is my custom heater for my 12V powered Ultimaker 2 clone. It's based on original Ultimaker 2 heater layout. I've laser cut it of 2mm PA6 aluminum plate. I've drilled M3 screws sockets with 6mm drill bit. It has…
![[WIP] Ultimaker 2 (UM2) part fan shroud - no supports needed](https://media.printables.com/media/prints/478418/images/3924939_07774213-b9d0-4cce-985b-8d7c6a9de842/img_20230512_174831509.jpg)
