1 / 2
Remix of Bowden Tube Straightener for UM2+ — zdjęcie 1
1 / 2

Remix of Bowden Tube Straightener for UM2+

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the great "BowdenTube Straightener" by TheSeend adapted for an Ultimaker 2+ and Ultimaker Extended 2+. What…

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
146
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Remix of the great"BowdenTube Straightener" byTheSeend adapted for an Ultimaker 2+ and Ultimaker Extended 2+.

What are different in this remix :

  • the bowden straightener region is nowcircular, in order to straighten the tube during printing in all surface of the building platform,especially the back area toavoid flexion of the bowden andreduce friction of the filament into the bowden.
  • the distance between the two screws axis, the diameter of screw heads and the space for the clip were measured and re-adjusted
  • the square hole has no particular function, but is just there to reduce the amount of material without decreasing mechanical strength

Files are available in STL and STEP formats.

Print Settings

Printer Brand:

Ultimaker

Printer:

Rafts:

No

Supports:

No

Resolution:

100 or 200 um

Infill:

30 %

Notes:

PLA used: PolyMax black from PolyMaker

Category: 3D Printer Parts

Tagi