Raspberry Pi Camera to Lego Technic adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds a Raspberry Pi camera securely. Requires 2x M2 nuts and bolts. Has 2 Lego Technic pin holes on the back at the…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 793
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Holds a Raspberry Pi camera securely. Requires 2x M2 nuts and bolts.
Has 2 Lego Technic pin holes on the back at the required spacing. Lens is centered exactly between the holes so recommend using "Technic double pin with perpendicular axle hole" (#32138) to go in the back as shown in photo.
Does not require supports and can be printed with a 0.4mm nozzle.
Sketchup CAD source file included for those that wish to tweak the design.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2mm layer height, 0.4mm nozzle
Infill:
40%
Filament:
PLA+ PLA+
Notes:
STL is in metres NOT millimetres.
Run through the two center holes with a 4.8mm drill, and the 2 outer holes with a 2mm drill
Category: Electronics