Raspberry Pi Camera to Lego Technic adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds a Raspberry Pi camera securely. Requires 2x M2 nuts and bolts. Has 2 Lego Technic pin holes on the back at the…
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 118
- Makes
- 0
- Views
- 793
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Holds a Raspberry Pi camera securely. Requires 2x M2 nuts and bolts.
Has 2 Lego Technic pin holes on the back at the required spacing. Lens is centered exactly between the holes so recommend using "Technic double pin with perpendicular axle hole" (#32138) to go in the back as shown in photo.
Does not require supports and can be printed with a 0.4mm nozzle.
Sketchup CAD source file included for those that wish to tweak the design.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2mm layer height, 0.4mm nozzle
Infill:
40%
Filament:
PLA+ PLA+
Notes:
STL is in metres NOT millimetres.
Run through the two center holes with a 4.8mm drill, and the 2 outer holes with a 2mm drill
Category: Electronics