Aruco Tracker Headphone Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Headphone clip for a 60mm Aruco marker. This one has a boom to offset the marker forward so its not obscured by your…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A Headphone clip for a 60mm Aruco marker. This one has a boom to offset the marker forward so its not obscured by your head when you look up.
Initial design works well enough for my purposes. Feel free to modify / improve, I've added the Freecad source here.
Prints without support.
*Update - Added a 10mm marker version, my camera was having trouble tracking the smaller 60mm version in opentrack. 10mm FreeCad file has been tweaked a little better. Use this file if remixing, remove the fillets first.
**Another Update 60mm is working ok, higher resolution on the camera resolved it.
I'd say try the 60mm version first.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
20
Filament: AMZN 3D PLA Black
Notes:
Bed 60 / Nozzle 210
Hotter Bed improves adhesion on the flat surface (at least for me)Category: Computer