Aruco Tracker Headphone Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Headphone clip for a 60mm Aruco marker. This one has a boom to offset the marker forward so its not obscured by your…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 77
- Makes
- 0
- Views
- 474
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
A Headphone clip for a 60mm Aruco marker. This one has a boom to offset the marker forward so its not obscured by your head when you look up.
Initial design works well enough for my purposes. Feel free to modify / improve, I've added the Freecad source here.
Prints without support.
*Update - Added a 10mm marker version, my camera was having trouble tracking the smaller 60mm version in opentrack. 10mm FreeCad file has been tweaked a little better. Use this file if remixing, remove the fillets first.
**Another Update 60mm is working ok, higher resolution on the camera resolved it.
I'd say try the 60mm version first.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
20
Filament: AMZN 3D PLA Black
Notes:
Bed 60 / Nozzle 210
Hotter Bed improves adhesion on the flat surface (at least for me)Category: Computer