2016 Ford Edge Keyfob Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My keyfob's back cover and key ring hole broke off, so I made this to put my keyfob on my keychain.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 819
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- GNU General Public License v3.0
This is a case to put a 2016 Ford Edge Key fob into. This may work with other fobs, but I haven't tried.
The build quality of fords keys are not very great, which led to the back case and key ring hole to break off, so I made this to put my key in so that I don't lose it easily.
In order to put the key in, you have to take off the key ring hole and back cover. Sliding it in can be a bit tricky, turn the key slightly sideways and then touch the top and bottom of the key to the inner edges, and it should slide in.
I highly recommend printing in PETG or TPU. PLA may break when sliding the key in.