Liczymy pasujące modele…
We lost our windshield wiper fluid cap. I designed and vase-mode printed a new cap that should pop over the top of the fill tube. The fit was pretty tight. I set the extrusion width to .8mm in the vase mode print and had it print 1mm of…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Link to Mark 2 version. 2016 Ford Ranger ball joint phone mount (Mark 2) by Alexander Brown | Download free STL model | Printables.com This phone mount, mounts to the 2016 Ford Rangers dash without the need for glue, screws or to…
A better version of this coin holder is supplied with the PLATINUM model of the car. I removed the deep pocket since it impared the printing too much for my needs. I think it would fit other vehicules as well, the original part number is…
Monster from Doom 2016. Modular kit.
EN: Conversion kit for Lima V80 002 (201625L): NEM coupler adapter and decoder holder fits for ESU Adapterplatine 21MTC (51967) DE: Umbaukit für Lima V80 002 (201625L): NEM Kupplungadapter und Decoderhalter passend für ESU Adapterplatine…
This is a wearable replica of the Ghostbusters: Answer The Call (2016) Remote Trigger armband as worn by Holtzmann. In the above photos you can see a close-up screenshot of the prop from the film, as well as one of my fellow South…
I really like the Vulcanus V1 design by Vulcaman - you can find his instructable here: https://www.instructables.com/id/Vulcanus-V1-2016-Rework-MGN12-Linear-Slide-Update-/ But I had some problems when building a complete enclosure for the…
no need for sheet metal part
Hockey pucks with classic Toronto Maple Leafs logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…
print internal hole with support or it wont be dimensionally correct. m3 20 bolt through the 17mm cellphone knob to reinforce it or it will break. there is a nub on the print for correct orientation with the flat side of the shaft.
This custom-designed wireless charger mount is perfect for Audi A5 and A4 models from 2016 to 2024. It is compatible with the OnePlus AIRVOOC 50W Magnetic Charger , making it ideal for OnePlus 12 and 13 phones with MagSafe ring covers.…
This is hold my Spyrus Key on the side of my MacBook Pro 2016
Here a Samsung Galaxy tab A (2016) holder for wall or 4080 aluminum extrusion Material: PLA Layer: 0.2mm Infill: 15% 3d Honeycomb Additional materials needed: 1X M8X65 Socket bolt between the wall mount and the arm 1X M6X25 Socket bolt…
This custom-designed wireless charger mount is perfect for Audi A5 and A4 models from 2016 to 2024. It is compatible with the OnePlus AIRVOOC 50W Magnetic Charger , making it ideal for OnePlus 12 and 13 phones with MagSafe ring covers.…
This was designed to mount furrion vision s screen for RV backup camera. printed with PetG 6 wall loops and 59% infill. Must print with suction platform down on smooth bed.
I needed a home for the mic, something strong that wouldn't stand out. Printed in PETG using the “Strength” profile on a QIDI Plus4. Designed to mount on the right side of the Yaesu FTM-150R + Ford Fusion 2016 Detached Head Mount using…
Needed a non-destructive way to mount work lights to my 2016 XC70, but I didn't want to drill any holes, so I made this mount. Printed with Bambulabs H2D, ABS and 30-35% infill. This will unfortunately not fit the P2 roof rails. There are…
https://cad.onshape.com/documents/c8e8ca89eb6567ed4a442a5c/w/f4c2778f42168fe988feea3a/e/ab76905e51ded16ee7d8fe93?renderMode=0&uiState=6944de2c005aa8451a0bc176
This is a replacement for the vent in a 3rd Gen Toyota Tacoma (2016-2023). There is no cutting necessary to fit. Install video https://www.instagram.com/reel/DC2fgKzRuHT/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Material: PETG…
Chevrolet Camaro SS 2016 widebody, fenders have been extended to give it a widebody look.
Chevrolet Camaro SS 2016 wide body key chain, .8 layer height, fenders have been extended to give it a widebody look.
BGE623 Side Mirror Repair Gear 876101U060, 876201U060 for KIA Sportage Sorento 2011-2016 Sonata 38-Teeth Outer Diameter:32.40 mm
Replacement for the standard vent system to add phone holder.
Technical Description / Technický popis English Version ESC Protective Enclosure for Arrma Fury Mega 2WD (2016) This is a custom-designed ESC protective box for the 1:10 Arrma Fury Mega 2WD Short Course Truck . It is designed to mount…
You can change size, and cut model in any parts. I printed in 54 cm, 3 parts (18 cm each), 8mm tall. Then stack in with glue.
Key cover for a Peugeot Partner 2016 My spring-loaded key fell apart, so I decided to make a new cover.
A scanned 3D model of the interior of the "pet carrier" underseat storage bucket for a 2016 or later Vespa GTS 125-300. I used this as a cutting tool in Fusion to design a custom organizer; it's not meant to be a printable replacement…
The Modern Muscle, Cast in Aggression. This is not a car. This is the reincarnation of American defiance, cast in sculpted steel. The Chevrolet Camaro SS immortalizes the visceral, unapologetic roar of a modern-day warrior. Every chiseled…
I installed the tweeter on my Ford F150 from 2018, which had no B&O system. In case your mounting situation differs, feel free to modify the share the remix. Print suggestions To avoid warping during hot summers, print it in ASA or…
Summary This is a mount for the A-pillar of the 2016 Mazda Miata MX-5 (ND), allowing any items from the modular mounting system by HeyVye to be connected to the A-pillar of the car. I use this as a mount for my phone with a magnetic…
We lost our windshield wiper fluid cap. I designed and vase-mode printed a new cap that should pop over the top of the fill tube. The fit was pretty tight. I set the extrusion width to .8mm in the vase mode print and had it print 1mm of…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
I did not like the much more space saving designs which stack batteries because of them touching each other. Hence here comes yet another battery holder for CR2016 in a 2 by 1 by 3 units high bin. It can hold up to 30x CR2016 batteries.…
I made this to hold my 2016 Vauxhall Astra keyfob because both of my keys keyring holder had snapped off, it probably fits other makes/models being GM. It's bulky but a much cheaper option than buying a new key fob. You need to really…
I tried to install a new dashcam in my Toyota Camry 2016 and found that I cannot use "add-a-circuit kit" in instrumental panel fuse box as its lid sits too close to the fuses. I've found the euggie 's design , but decided to create a…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Replacement part for the damaged part of Modultop Berlingo 2016.
If you want to get this template without subscribing, write me in chat! - SideSilhouette
If you ever have a need to replace a broken infotainment button on this specific car, then you are @ right place! This button takes 20 minutes to print (I used PLA) and saves a lot of money because you can't buy one without purchasing the…
Simple stand. Print 2 times base and one or two bracket as you wish. PLA, layer height doesn't matter. The bracket snaps on the base. No glue needed. Should also fit other 10 inch or bigger tablets.
Fits a classic 32oz Nalgene water bottle in the center console of a 2015/2016 Honda CRV, using the smaller rectangular section of the console to not block the main cup holders when not in use. Print in the provided orientation with…
Coincell Battery holder, fits 30 in total CR2032, CR2025, CR2016 etc... (any CR20XX, with a thickness less than 32mm) Naming on the Bottom is only for visual identification, all 30 slots are the same
The Fusion 360 archive (.f3d file) has a pair of parameters (x_offset & y_offset) that allows you to reposition the PSU inside the case (see image). There's not that much moving room in the case, so watch out for hitting the other…
Update June 2025: 100 degrees Fahrenheit today, and the spring snap of the current version is no longer providing retention with the clip when printed in PETG. Update July 2025: ABS printed clip is holding up to 100 degree temp so far.…
Lovely design from Corvus Oculum. I've remixed it to an 18mm slot for current MacBooks.
If your rain sensor won't stay on the bracket mounted to your windshield, the likely cause is a lost “TAB B” which slots into the front of the sensor casing and serves to secure the casing to the bracket. “TAB B” is not sold by itself,…
This allows for a larger cup / bottle to be used. This is designed to fit a 2016 Mercedes C-class but may fit other models. Allows a bottle / cup of uptown 96mm in diameter. The base fits into a original cup holder with a minimum size of…
There is a problem with the rearview mirrors of these Yamaha motorcycles, which makes them loose so they rotate. There are no ways to fix this; you have to change the mirrors. This support aims to fix this by stopping the rotation of the…
There is not a way to disable the passenger seatbelt alarm. Pluging this in lets you “turn off” the alarm. This should not be used if a person is in the seat. I've included a few variations of the buckle. Beveled Pyramids Grids Spiky
Seat Ibiza Cupra 2016 Keychain This stylish keychain is inspired by the sporty Seat Ibiza Cupra 2016, perfect for car enthusiasts! Best results are achieved when printed with a 0.2 mm nozzle for finer details. The keychain shown in the…
I was disappointed to find that the 2016 MacBook Pro's charging cable no longer had the two little clasps that would hold the cable when not in use. So, I made my own alternative. This build has two main functions: (1) Bundle the small…
Bonjour, Un ami à cassé ce petit clips de garde-boue de son vélo de marque STEVENS, le modèle est un "randonneur lite" de 2016. J'ai donc reproduit la pièces qui est maintenant disponible pour tout les cyclitse qui auraient rencontré le…
Dies ist mein Knopfzellenspender für CR2032 CR2016 CR1632 Gedruckt in PETG Layer02 Speed 80mmsek
There isn't enough clearance on the bottom of the NBF-32016 to use dual-lock or command strips. Also, they removed the mount screw holes in the EQ13 model. Thus this bracket, it takes the weight of the EQ13, just drop it in place,…
SG2016 modular rack mount requires 1u rails, recommended to print with ASA https://www.printables.com/@LvL_Dani_470947/collections/2036642
Hi Internet sim racers.... on request about some of my older Youtube videos... I've dug up the old STL's from my SimDash V5... updated it to include the pro micro mount and flash uploaded them all to thingiverse. I've ran through the…
First version which happened to work as intended. Aint pretty, but works. There's an issue with scaling. instead of 80mm it has 8mm
This is a cover for the passenger door of a 2016 Grand Caravan. It prevents the dog from rolling the windows up and down. It fits in the little change hole to stop it from falling off.
There is a space on the floor beside the seat and the door on a Prius (I have a gen3) and it would be a great place to store something liker an ice scraper or gloves, except that whatever you put in it will roll under the seat to…
3D Toyota Aygo 2016 Keychain Model Recommended Print Settings: 0.12mm Layer Height Tree Support Enabled Recommended Length is 16mm Lower Print Until Undercarriage Touches PrintBed (optional) Print Settings Printer Brand: Creality Printer:…
3D Toyota Aygo 2016 Keychain Model Recommended Print Settings: 0.12mm Layer Height Tree Support Enabled Recommended Length is 16mm Lower Print Until Undercarriage Touches PrintBed (optional) Print Settings Printer Brand: Creality Printer:…
2x2 Gridfinity battery holder for CR1632, CR2025 & CR2016 batteries. Includes coloured labels as separate parts for easy painting. The bin is 30mm high when measured from the drawer base. Printed on an MK4s with an MMU3 in Spool3D matte…
Added 3mm to close gap between cap and steel wheel remixing from original file named “Front_Centre_cap_final.stl”. This worked for a 2016 Rav4 LE AWD on the front wheels. The original final name “Front_Centre_cap_final.stl” worked for the…
This model was originally designed to work with the Kicker 51KST2504. I tested the bracket with the JL C2-075ct. The JL surface mount solution doesn't work well with this bracket and may require some modification to hold the tweeter…
This was the first model I ever designed. It was in 2016 in Tinkercad, right after an Easter update that added half of the pieces used in this model. I have no idea what it's supposed to be, but I made it. It might need supports under the…
Halterung für ein Tablet (Samsung Galaxy Tab A 2016) zur Wandmontage. Abgewinkelter Stecker notwendig Stückliste: Bauteilname Beschreibung Menge Hülle 1 Deckel 1 Wandhalterung 1 Innensechskant-Rundkopfschraube DIN EN ISO 7380-1 - M4 x 6 4…
Here a Samsung Galaxy tab A (2016) holder for wall or 4080 aluminum extrusion Material: PLA Layer: 0.2mm Infill: 15% 3d Honeycomb Additional materials needed: 1X M8X65 Socket bolt between the wall mount and the arm 1X M6X25 Socket bolt…
Models included are labeled R or L for right or left side of the car. The original clip incorporates a 11x10x3mm steel ring to support the area directly underneath the bolt that holds it in place. This replacement reuses that steel ring.
In the Town and Country, the digital time is visible on the display right above the analog clock, so I hardly ever look at the analog clock. Add the fact that you have to set the two times separately every time change, and it is…
hvac control knob for 2016 toyota highlander may fit other makes/models/years if printed face down it requires no support
Beer Crate battery holders for CR2032 CR2016 I used glue, to make it stackable. Print it out and glue some parts together. Have Fun, Don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a…
Used GritShift MX stem, might be clearance issues for others. Number plate mount attaches to fork with zip ties.
Use these fork covers to hide the stock chrome. I used Nylon w/ Carbon Fiber at .12mm layer height and they turned out perfect. This design will be featured on Cheese MAKE by Roman Dmitri channel on YouTube: https://youtube.com/@cheese-make
Rear Bumper Tow Towing Hook Cover Eye Caps Fit for Mazda 3 2014-2016 Text version can be modified so that you can add some text to your bumper Category: Automotive
This camera attachment is for a Mini Cooper Countryman 2010-2016 (R60). No modifying the car needed. Just fasten it behind the number plate lighting (see pictures). The pictures are from an older version, but the idea is the same. I made…
This is sim-racing steering wheel center panel replica used in following cars: 2016 Ford Focus RS RX (Ken Block) 2018 Ford Focus RS RX (Steve Arpin) 2014 Bentley Continental GT3 After printing, wrap panel with carbon vinyl foil, cut all…
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
Original model scaled to 65% to fit my 15" 2016 MacBook Pro with Touchbar. Laptop fits with my case either way up but more snugly if you put the fat end down. Models also include some rubbery feet I printed in Ninjaflex (seen in grey in…
Spring Preload Adjustment Knob for Suzuki v-Strom 650 (2016), For slicing added more top and bottom layers as well as vertical shells for added rigidity, printed in PETG, with supports, letters up, to increase front surface appearing.…
I wanted something for my CR batteries, to fit onto a 2x2 grid. For the Bin base, I used the Fusion360 Gridfinity extension: https://apps.autodesk.com/FUSION/en/Detail/HelpDoc?appId=7197558650811789&appLang=en&os=Win64. Supported CR Cell…
I printed it in ABS because of the high temperatures in summer, no support material is necessary
This was designed to mount furrion vision s screen for RV backup camera. printed with PetG 6 wall loops and 59% infill. Must print with suction platform down on smooth bed.
Cupholder to fill the center console void in the 2013-2016 RAM 2500 truck
Adjusted version of jufy111's cup holder insert for smaller cups, modified for 2019-2025 Honda Passports (and I think 2016-2022 Pilots and 2017-2025 Ridgelines).
Tool for oil cap on 2016 Moto Guzzi V7 II Stone and similar motorcycles. I used Polycarbonate w/ ABS (from Polymaker) to ensure high service temperature. This design will be featured on Cheese MAKE by Roman Dmitri channel on YouTube:…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
A lovely model of the adorable, 2016 Suzuki Lapin Kei car, one of the cutest cars from Japan!
Wall mount for Samsung Galaxy Tab A (2016) 10.1 This model forced me to learn how to use Fusion 360.
