2016 Mazda Miata MX-5 (ND) A-Pillar Mount for the Modular Mounting System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for the A-pillar of the 2016 Mazda Miata MX-5 (ND), allowing any items from the modular mounting system.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
This is a mount for the A-pillar of the 2016 Mazda Miata MX-5 (ND), allowing any items from the modular mounting system by HeyVye to be connected to the A-pillar of the car. I use this as a mount for my phone with a magnetic mount.
I've provided two options: one is a print in place version that has the connectors vertical that can be printed with no supports.
I wanted a version that would print without supports horizontally, so I made a slide in version that can be combined. Because I printed with ASA, the two parts can be fused with an ASA acetone slurry to create a very strong bond. Thus, the connection is meant more for placement and clamping the glue in place than it is for a strong, physical bond.
For those wondering about the design process, I used a contour gauge to get the shape, traced that onto paper and scanned it to get a digital version. Then, I imported that into Inkscape and manually created a Bezier curve for the shape of the profile. From there, it was all normal modeling in Fusion 360.
Post-Printing
Glue together
If you printed this with the two parts that slide together, glue them together. I used a slurry made from ASA and acetone to fuse them together. Choose an appropriate glue for your plastic of choice.
Apply the adhesive, then slide the connector into the slot.
Removing the A-pillar molding
The A-pillar molding is attached with clips. Open the car door, then simply pry away in the center of the pillar where the strongest metal clip is. There are two additional plastic clips at the top and bottom. Pull firmly yet carefully. Your speaker is connected, so do not pull very far away.
Attach the mount
Simply press the mount into place until it snaps around the A-pillar molding
Replace the A-pillar molding
Simple press the molding back in place with the hooks. Make sure you feed the hook at the bottom into the hole before trying to clip it back in place. Mild pressure is enough to clip it back in place.
