1 / 9
Toyota Camry 2016 fuse box lid spacer — zdjęcie 1
1 / 9

Toyota Camry 2016 fuse box lid spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I tried to install a new dashcam in my Toyota Camry 2016 and found that I cannot use "add-a-circuit kit" in…

Ocena
0 / 5
Polubienia
18
Pobrania
69
Wydruki
0
Wyświetlenia
871
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I tried to install a new dashcam in my Toyota Camry 2016 and found that I cannot use "add-a-circuit kit" in instrumental panel fuse box as its lid sits too close to the fuses.

I've found the euggie's design, but decided to create a spacer instead (to keep the original fuse box lid that has a diagram).

Notice: the original design is for Camry 2012. I have Camry 2016 (ASV50R) and its fusebox has the same size.

STEP file included.

Black on pictures - printed in ABS. Grey on pictures - printed in PETG (old design).

03 Mar 2024: I re-designed the spacer so no supports required any longer and it is easier to print in ABS.

P.S. I've connected my dashcam into "S/Roof" (battery+) and into a free slot between "Tail" and "EPS-IG1" (ACC).

 

Notes:

ABS or other high temperature resistance filament must be used as it might be very hot in car (mine test spacer printed in PETG was slightly deformed after just a few days of usage).

Use glue and internal + external brims for adhession.

I pritned the spacer on Elegoo Neptune 4 with black Sunlu ABS without printer enclosure (ambient temperature ~30-35).

Temperatures: bed 105, extruder 255 (first 2 layers - 110/260)

Speed: ~60mm/s (first 3 layers 30mm/s)

Brim: inner + outer, 8mm

Supports: No

Used sugar water as glue :)

Tagi