Toyota Camry 2016 fuse box lid spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I tried to install a new dashcam in my Toyota Camry 2016 and found that I cannot use "add-a-circuit kit" in…
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 69
- Makes
- 0
- Views
- 876
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried to install a new dashcam in my Toyota Camry 2016 and found that I cannot use "add-a-circuit kit" in instrumental panel fuse box as its lid sits too close to the fuses.
I've found the euggie's design, but decided to create a spacer instead (to keep the original fuse box lid that has a diagram).
Notice: the original design is for Camry 2012. I have Camry 2016 (ASV50R) and its fusebox has the same size.
STEP file included.
Black on pictures - printed in ABS. Grey on pictures - printed in PETG (old design).
03 Mar 2024: I re-designed the spacer so no supports required any longer and it is easier to print in ABS.
P.S. I've connected my dashcam into "S/Roof" (battery+) and into a free slot between "Tail" and "EPS-IG1" (ACC).
Notes:
ABS or other high temperature resistance filament must be used as it might be very hot in car (mine test spacer printed in PETG was slightly deformed after just a few days of usage).
Use glue and internal + external brims for adhession.
I pritned the spacer on Elegoo Neptune 4 with black Sunlu ABS without printer enclosure (ambient temperature ~30-35).
Temperatures: bed 105, extruder 255 (first 2 layers - 110/260)
Speed: ~60mm/s (first 3 layers 30mm/s)
Brim: inner + outer, 8mm
Supports: No
Used sugar water as glue :)