Counting matching models…
This is a low-poly 3D model of a Toyota Camry, designed for easy 3D printing. It features a simplified, polygonal design while still capturing the recognizable shape of the Camry. The model is intended for display, and I will be adding…
Changed the dimensions of the model to fit my specific dashcam ( https://www.amazon.com/gp/product/B0BJZQ37G7/ref=ox_sc_saved_title_8?smid=A3CIGEUYW4U1DT&psc=1 ) and my car (Toyota Camry SE 2024) Photos in the car are of the mockup I made…
I tried to install a new dashcam in my Toyota Camry 2016 and found that I cannot use "add-a-circuit kit" in instrumental panel fuse box as its lid sits too close to the fuses. I've found the euggie 's design , but decided to create a…
Note: This should only be printed in PETG or other high temperature material. PLA will melt in your car. I designed this as a complete replacement part after I was shorted one of these from the factory. This is by no means made to be…
Printed on Ender 3 Pro. I would suggest printing the two sides seperately even if your printer is big enough for the full model. The sides are made to allow enough leeway that a few mm adjustment can be made without a problem.
Fits 2001-2006 year model with alloy wheels. Printed PLA+. Tight fit, press in then give a light kick.
Power seat adjustment for Toyota Camry 2012-2014.
An insert for the cup holder in a 2002-2006 Toyota Camry (most models, I think) that facilitates securely holding smaller cups or bottles. The original part seems to wear out and fails to stay in place. They are difficult to find in the…
This is a low-poly 3D model of a Toyota Camry, designed for easy 3D printing. It features a simplified, polygonal design while still capturing the recognizable shape of the Camry. The model is intended for display, and I will be adding…
An insert for the cup holder in a 2002-2006 Toyota Camry (most models, I think) that facilitates securely holding smaller cups or bottles. The original part seems to wear out and fails to stay in place. They are difficult to find in the…
My car was missing one out of four clips 67923-06040 , and it wasn't available for an order from a supplier. Original is a metal one, this is an attempt to recreate one for 3d printing. This fits on the rear side of the door, it will not…
I designed this set of diffusers to fit directly around the bumper of a Toyota Camry between the years of 2007-2011. Make sure to apply a couple coats of clear coat to protect it from the weather. I applied it with JB Weld and magnets to…
Changed the dimensions of the model to fit my specific dashcam ( https://www.amazon.com/gp/product/B0BJZQ37G7/ref=ox_sc_saved_title_8?smid=A3CIGEUYW4U1DT&psc=1 ) and my car (Toyota Camry SE 2024) Photos in the car are of the mockup I made…
Toyota Camry, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
I created this part because my cup holder separator failed on my 2003 Camry, mainly because of a small piece of plastic breaking out of the mounting hole that the tabs for the separator slip into. This part has longer pivot tabs than the…
A replacement air vent tab for Toyota Camry 2002 - 2006. Installation. Just push it on to the vent, then push up the blade up to click it into position. Not sure if that made sense. Print instructions Print it "sideways" so that the…
I wanted to make a spare key to get into my car in case I lost my original keys without paying for an expensive key cutting procedure at a dealer. So i designed this key which worked to open my door. I took pictures of my original key and…
A suitable 3D model for a top speaker mount for a Camry with center holes measuring 50mm can be described as follows: Mount Design: The mount should be designed to fit securely on the top surface of the Camry's interior, allowing for easy…
This model fits fairly snug in the 2018 Toyota Camry cup holder, but it easily fits in any of the other vehicle cup holders I have tried. The phone in the pictures is an iPhone 6 with an Otterbox case on it, but my Samsung Galaxy S10e…
Design Printed in TPU. Pictures coming soon… - Details - Inner: M8 x 1.25 Outer: M18x1.5 Height: 20mm
A tribute to my first car (RIP 1994-2020). A imperfect AI model of a 1994 Toyota Camry LE Station Wagon (XV-10). I used Luma AI to make the model, and 3-D printed using Ender 3 V3 SE, PLA filament, 5 percent infill. I included a file with…
This is a replacement hook for the trunk organizer for a 2010 Toyota Camry. It should fit 2009 to 2017 models though? It uses a 25mm x 5mm wood screw (1" x ¼" is fine too) to splay the fingers. I printed it in PLA+ but it would probably…
Connect it to the battery and you have a convenient place to plug a portable freezer, charge drones, or camera. There's no need to cut anything, it goes in place of stock cover that gives access to emergency fuel tank door leaver. Best…
It's pretty hard to print, use filament that allows for easy support removal like pla or abs. The model with a hole is for a switch 20mm hole, 23mm external diameter.…
I tried to install a new dashcam in my Toyota Camry 2016 and found that I cannot use "add-a-circuit kit" in instrumental panel fuse box as its lid sits too close to the fuses. I've found the euggie 's design , but decided to create a…
I made this based on my 2010 Toyota Avalon. It is like similar or the same for 2007 to 2010, possibly also 2011 and 2012. I believe it is also similar or the same for a Camry of similar year range. Disclaimer: The original part is some…
