FLSUN kossel PSU cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for my FLSUN kossel power supply, which is probably generic power supply, but I was either lazy or really unable…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 848
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Made for my FLSUN kossel power supply, which is probably generic power supply, but I was either lazy or really unable to find a cover for it. So I made this one. It has a hole for power plug with fuse and 3x 10.5mm holes for 3.5mm jacks (they should be glued in instead of being screwed to the place). Obviously, those holes can be used to route cables as well.
The 2 "back flaps" can be used to add 2 more screw holes, preferably with a soldering iron (as I was lazy to measure where they are supposed to be, as they are not needed).
Print instructions
Category: 3D Printer Parts Print Settings
Printer: FLSUN kossel
Rafts: Doesn't Matter
Supports: No
Resolution: 0.3mm