1 / 4
Logitech Z333 speaker wall mounted shelf
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I felt like I needed more room on my desk and figured I could make wall mounts for my Logitech Z333 speakers on the desk. The shelves came out great! You can use these shelves to hold other items as well. I added a picture of one holding a plant for reference.
Print settings
I printed my shelves using Overture red PLA. You should be able to print it using your very own PLA settings. However, I would recommend a raft as it is a 5 to 10 hour print depending on your infill and other settings.
My settings
- 0.4mm nozzle
- layer height 0.2mm
- first layer height 0.25mm
- (optional, depending on your bridging potential, you may not need this) supports
- (optional) outer Brim/Raft at 5mm
Enjoy and do not hesitate to let me know what I can do different!