Case for Intel NUC5PPYB with Home assistant themed lid.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After endless searching for a case for my NUC, I decided to make my own. through a lot of trial and error Ive come up…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 1102
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
After endless searching for a case for my NUC, I decided to make my own.
through a lot of trial and error Ive come up with this very simple design.
The computer is fastened to the pillars inside with m3 self tappers , they only need to be 8mm long.
the button actuator slides in through the hole in the lid and just push the button cap on the top , should be ok with interference fit.
The lid is also interference fit so no visible screws.
I carefully designed the vents for input and output to line up with the fans respective ports
Its been running HA for a week now and not even got hot yet.
I am keen to hear if anyone has improved or remixed this kit , or even created this one yourself.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20-30
Filament:
SUNLU PLA
Notes:
Home assistant lid is best printed flat side down , supports on (touching build plate only)
Actuator I printed with support (touching buildplate).Everything else doesnt need supports.
Category: Computer