Keybak Super48 Non-rubbing holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keyback holder that avoids having kevlar cord rub on the case, reducing friction and wear.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 722
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keyback holder that avoids having kevlar cord rub on the case, reducing friction and wear.
Sized for Base 20 aluminum extrusion.
Holes for M5x25 Low Profile screws. (Open Builds)
Be Sure to face slotted side towards bottom/keyhole opening. (as shown in photo)
You will need to file off the belt clip part that is raised towards the end. (also can be seen filed off in photo)
(mine were resin printed with some hollowing which is why you see some random holes that are not in the stl.)
Edit: Added the mount for the remote end, mine uses the conical part of the keybak to hold in place, i happend to do some hacking (swapping parts from a 20oz ratcheting) so i didn't have the ball stud on the back of my end pieces and the ball part will not fit, so cut it off maybe? or redesign to fit your needs.
Center for string is 11.25 mm from the extrustion face.