Chevy LS1 LS2 LS3 LS6 LS7 Valve Lifter and Pushrod Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tray made to hold valve lifters and pushrods from a Chevy LS engine. Useful during tear down and rebuild…
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 196
- Wydruki
- 0
- Wyświetlenia
- 1498
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a tray made to hold valve lifters and pushrods from a Chevy LS engine. Useful during tear down and rebuild process to keep lifters in proper order so they can be returned to the same bore/cam lobe. This was original work on my part so no worries about infringing on anyone elses patent or copyright.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Filament: Any and All PLA Purple
Notes:
I used purple because that is what I had. Chevy engine orange might work, too.
Must be glued or otherwise adhered together.
I used acetone to make the parts adhere together. I put a little acetone in a stainless bowl and used a small brush to coat the surface on the tray I was trying to adhere either the push rod hold or the lifter cylinder to. Then I just dipped the part I was going to add into the acetone and then quickly pressed the part onto the tray. This makes a really strong bond without. You can pretty quickly get all 4 of the push rod holders and the 16 lifter cylinders stuck onto the tray (like 5 minutes).
Category: Tool Holders & Boxes