Chevy LS1 LS2 LS3 LS6 LS7 Valve Lifter and Pushrod Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a tray made to hold valve lifters and pushrods from a Chevy LS engine. Useful during tear down and rebuild…
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 197
- Makes
- 0
- Views
- 1,502
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a tray made to hold valve lifters and pushrods from a Chevy LS engine. Useful during tear down and rebuild process to keep lifters in proper order so they can be returned to the same bore/cam lobe. This was original work on my part so no worries about infringing on anyone elses patent or copyright.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Filament: Any and All PLA Purple
Notes:
I used purple because that is what I had. Chevy engine orange might work, too.
Must be glued or otherwise adhered together.
I used acetone to make the parts adhere together. I put a little acetone in a stainless bowl and used a small brush to coat the surface on the tray I was trying to adhere either the push rod hold or the lifter cylinder to. Then I just dipped the part I was going to add into the acetone and then quickly pressed the part onto the tray. This makes a really strong bond without. You can pretty quickly get all 4 of the push rod holders and the 16 lifter cylinders stuck onto the tray (like 5 minutes).
Category: Tool Holders & Boxes