Pegboard Paint Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tamiya paint rack for 1/4'' hole pegboard spaced 1" apart. Holds paints with a maximum diameter of 1.42". Mig enamel…
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 176
- Wydruki
- 0
- Wyświetlenia
- 1599
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tamiya paint rack for 1/4'' hole pegboard spaced 1" apart. Holds paints with a maximum diameter of 1.42". Mig enamel washes are able to balance and stay in place on the rack as well just not as secure as the Tamiya paints. Print with supports and make sure the infill you chose and the percentage make a good connection between the pegs and the rest of the rack in your slicer. My supports kept being hit off the bed because I haven't re-tuned my retraction settings so I used a raft which should not be needed. Pegs may need to be filed or sanded to remove remaining support material for a proper fit.
Check out my other pegboard paint rack for Ammo by Mig paints here: https://www.thingiverse.com/thing:3334508
Print Settings
Printer:
Anet A8
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.3
Infill:
20
Notes:
In Cura I used Cubic Subdivision. This should generate a solid line of infill that goes from the body of the rack into all of the pegs for added strength.
Category: Organization