Raspi Cam HDMI Extension Case with bracket for Ender 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this to accomodate a raspberry pi cam v2 and the HDMI adapter board by Petit Studio…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I designed this to accomodate a raspberry pi cam v2 and the HDMI adapter board by Petit Studio (https://www.tindie.com/products/freto/pi-camera-hdmi-cable-extension/)
This is designed to use the hardware that comes with the HDMI kit!
*The bracket is a remix of https://www.thingiverse.com/thing:2886101 to fit on ender 3 printers. If you have a different printer you might need to remix it or design something yourself.*
I have tried to show the installation order in the pics, but I'll type them out here too:
- Glue M3 nut into the cutout
- Fasten pi cam v2 using the M2 screws, spacers and nuts provided with the kit
- Position HDMI board on top (the lid will hold it in place)
- Put on the lid and run an M3 x 10mm bolt to fasten it down
- Profit
Check out my Raspberry Pi 4 Case that houses the other end of the HDMI adapter kit - https://www.printables.com/model/199730
Category: 3D Printer Accessories