E3D V6 Extender (7mm shorter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
@FooFighter94's version was too long, so I shortened it by 7mm (and probably could have gone for more for a better…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 144
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
@FooFighter94's version was too long, so I shortened it by 7mm (and probably could have gone for more for a better match with original fan shroud depth).
I noticed later that @FooFighter94 actually lengthened his from the original (http://www.thingiverse.com/thing:749929) by @allon.
Print Settings
Printer Brand:
Printrbot
Printer:
Printrbot Plus
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
100
Post-Printing
Needed a bit of scraping with x-acto to correct for droop under arches. Need a bit of sanding to fit into extruder.
How I Designed This
Modified in Windows 10 3D builder app.
Category: 3D Printer Parts