Waveshare 4.3 inch display mount for the VORON V0.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This display mount is intended for the VORON V0.1 in combination with the V0.1 Trident Skirt mod.
- Ocena
- 4,833 / 5
- Polubienia
- 45
- Pobrania
- 382
- Wydruki
- 6
- Wyświetlenia
- 2880
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Waveshave 4.3 inch displayholder is designed to fit perfectly onto the VORON V0.1. The skirts i used were from the VORON Trident skirt mod for the VORON V0.1.
V0.1 Trident skirt mod:
Used parts:
- 4x M3 threaded inserts
- 2x M2 threaded inserts
- 4x M3x10mm screws
- 2x M2x20mm screws
- 4x M2.5x6mm screws for mounting the display
- 2x M3x8mm screws for fixing the displayholder to the frame
printing the parts:
All the parts are printed in ASA or ABS with 4 outer perimeters and 40% infill. Pay attention to orient the parts to be printable!
assembling the mount:
[red] insert M3 threaded inserts into the middle parts [orange] insert M2 threaded inserts into the left and right part |  |
| [red] Complete the assembly by screwing in the M3x10mm screws. |  |
Put the display on the holder and and fix it in place with the screws. At the last step you have to put the front cover on. |  |
If there are any questions left you can contact me. Happy printing and building!