Waveshare 4.3 inch display mount for the VORON V0.1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This display mount is intended for the VORON V0.1 in combination with the V0.1 Trident Skirt mod.
- Rating
- 4.833 / 5
- Likes
- 45
- Downloads
- 382
- Makes
- 6
- Views
- 2,881
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Waveshave 4.3 inch displayholder is designed to fit perfectly onto the VORON V0.1. The skirts i used were from the VORON Trident skirt mod for the VORON V0.1.
V0.1 Trident skirt mod:
Used parts:
- 4x M3 threaded inserts
- 2x M2 threaded inserts
- 4x M3x10mm screws
- 2x M2x20mm screws
- 4x M2.5x6mm screws for mounting the display
- 2x M3x8mm screws for fixing the displayholder to the frame
printing the parts:
All the parts are printed in ASA or ABS with 4 outer perimeters and 40% infill. Pay attention to orient the parts to be printable!
assembling the mount:
[red] insert M3 threaded inserts into the middle parts [orange] insert M2 threaded inserts into the left and right part |  |
| [red] Complete the assembly by screwing in the M3x10mm screws. |  |
Put the display on the holder and and fix it in place with the screws. At the last step you have to put the front cover on. |  |
If there are any questions left you can contact me. Happy printing and building!