1 / 4
Electrolux vacuum tube holder for IKEA'S IVAR
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Will work with any other tube 35 mm in diameter
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 570
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (13)Powiązane
Height of the holder matches height of the Ivar side plank: 40 mm.
Use 25 mm screws, if the shelf is right behind the plank, screw could be longer.
20% infill, 3 perimeters, PETG recommended, print in place, no supports needed.