CEN Racing F450 Super Duty Underbody Protection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Underbody protection to keep debris out of the cab, and to protect the lower edges of the body. Optional running…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 162
- Wydruki
- 0
- Wyświetlenia
- 862
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Underbody protection to keep debris out of the cab, and to protect the lower edges of the body. Optional running boards and front fenders attach to the side plates.
Update (May 27 2021): Added two smaller files for those with smaller print beds. You should be able to print "PartA" and "PartB" and each has two screw attachment points or you can glue them together to make the full piece. You can also print the running board on a 150x150 bed if you turn it 45º.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
Overture PLA
Notes:
Flip the side panels upside down and flat and use a wide brim. The brim supports the first layer of the outer section until it bridges to the rest of the body, but it is about .2 off the floor so it needs some help.
Category: R/C Vehicles